OmniaTap
Reinstwassersystem OmniaTap Der Allrounder.
For H2O pure types ASTM I + II.

 

OmniaTap is the ideal system when both pure water and ultrapure water are required, but in relatively small amounts. The ability to provide both types from a single system results from the combination of ultramodern purification technologies. These also make it possible to connect the system directly to a drinking water tap. A press on the dispenser button activates dispensing of ultrapure water type ASTM I via the digital dispenser control. The recirculation of the pure water held in the installed 10 litre tank keeps it permanently at type ASTM II quality. The pure water tank has a second outlet for feeding downstream end users.


Features

Bulletpoint OptiFill dispenser is standard
Bulletpoint TapWater set for direct connection to a drinking water tap
Bulletpoint 10-litre pure water tank has a pressure outlet
Bulletpoint Tank volume display in percent
Bulletpoint Simple and economical filter replacement
Bulletpoint Leakage sensor is standard
Bulletpoint Ready-to-use, including filter cartridges


One hand operation

One hand
operation

Easy water dispensing

Easy water
dispensing

Flexible on a work surface

Flexible on a
work surface



Flow chart

Flow chart OmniaTap


Specifications
OmniaTap
OmniaTap UV
OmniaTap UV/UF
ASTM II
Pure water performance l/h at 15 °C
6 or 10
6 or 10
6 or 10
Conductivity µS/cm
0.067 – 0.1
0.067 – 0.1
0.067 – 0.1
Resistance MΩ x cm
15 – 10
15 – 10
15 – 10
Pure water tank pressurized outlet
yes
yes
yes

ASTM I
Conductivit µS/cm
0.055
0.055
0.055
Resistance MΩ x cm
18.2
18.2
18.2
TOC-value* ppb
5 – 10
1 – 5
1 – 5
Dispensing performance l/min.
up to 2
up to 2
up to 1.6
Endotoxins* EU/ml
-
-
0.001
Particles**/ml
< 1
< 1
< 1
Bacteria** CFU/ml
< 0.1
< 0.1
< 0.1

Feedwater requirements
Drinking water according to DIN 2000
Feedwater temperature °C
+ 2 up to 35
+ 2 up to 35
+ 2 up to 35
Manganese and iron content mg/l
< 0.05
< 0.05
< 0.05
Free chlorine content mg/l
< 1
< 1
< 1
Silt density index (SDI)
max. 3
max. 3
max. 3

Technical data
Operating pressure bar
1 – 6
1 – 6
1 – 6
Supply voltage Volt/Hz
90-240/50-60
90-240/50-60
90-240/50-60
Connected load kW
0.1
0.1
0.1
Connector size mm
8 mm hose
8 mm hose
8 mm hose
Ambient temperature °C
+ 2 up to + 35
+ 2 up to + 35
+ 2 up to + 35
Dimensions*** W x H x D mm
390 x 720 x 615
390 x 720 x 615
390 x 720 x 615
Weight kg
22
23
23

* in dependence on the feedwater quality       ** with sterilizing filter 0.2 µm       *** with OptiFill Dispenser



Article no.
System type*
Typical applications
18200051
OmniaTap 6
AAS, IC, ICP, buffers and media preparation
18200101
OmniaTap 10
AAS, IC, ICP, buffers and media preparation
18200052
OmniaTap 6 UV
Ultra-trace analysis, ICP-MS, HPLC, TOC
18200102
OmniaTap 10 UV
Ultra-trace analysis, ICP-MS, HPLC, TOC
18200053
OmniaTap 6 UV/UF
Life science and microbiology, cell culture media
18200103
OmniaTap 10 UV/UF
Life science and microbiology, cell culture media

*filter cartridges and sterile filter capsule 0.2 µm included



Accessories
19200300
Wall mount Omnia
19200056
Disinfection kit Omnia
19200057
Disinfectant Omnia – 3 pcs./pack
19200021
Pre-treatment unit OmniaTap –10“

Consumable
16510100
Prefilter cartridges 1 μm – 10“
19200005
Pre-treatment cartridge OmniaTap 6
19200010
Pre-treatment cartridge OmniaTap 10
19200003
Ultrapure water cartridge Omnia 055
19100300
Sterile filter capsule 0.2 μm
19102100
Bio filter capsule
19500400
Sterile tank ventilation fi lter
19000050
Ultrafiltration module
19200055
UV lamp