Close

Type I + II

Pure and ultrapure water

The tasks in the laboratory determine the choice of the appropriate Omnia system. Pure water is required for the operation of laboratory autoclaves and dishwashers, as well as for media preparation and the production of buffer solutions.

If type II water and type I ultrapure water are to be produced at the same time, you have the choice:

OmniaTap xstouch

The intuitive all-rounder.
For H2O pure type I + II.


OmniaTap xstouch is the intelligent compact system with intuitive touchscreen operation when both pure and ultrapure water is required in small quantities.


The combination of state-of-the-art treatment techniques enables the extraction of pure and ultrapure water from just one system. It can be connected directly to a drinking water pipe. The flexible dispenser is used to extract category I ultrapure water. The removal takes place at the push of a button via the digital control of the dispenser.


An integrated 7 litre tank with recirculation keeps the quality permanently at type II. Downstream terminals can be supplied via an optional pressure output on the pure water tank.

Brochure OmniaTap xstouch Blueline (PDF)
  • very space-saving, fits on an A4 sheet
  • OptiFill Dispenser with touch screen as standard
    • Real-time TOC monitoring
    • Precise volume control
    • resource-saving filter volume with residual filter display
    • USB interface
  • Leakage sensor as standard
  • integrated pressure reducer as standard
  • Storage tank with recirculation
  • easy filter change
  • ready-to-use, ready for connection incl. filter inserts

 

OmniaTap xstouch 8 UV-TOCOmniaTap xstouch 8 UV-TOC/UF
Pure water values type II
Pure water performance at 15 °C [l/h]88
Conductivity at 25 °C [µS/cm]0.067 up to 0.10.067 up to 0.1
Resistance at 25 °C [MΩ x cm]15 up to 1015 up to 10
Ultra pure water values type I
Conductivity at 25 °C [µS/cm]0.0550.055
Resistance at 25 °C [MΩ x cm]18.218.2
TOC-value* [ppb]< 5< 5
TOC monitoryesyes
Dispensing performance [l/min.]up to 2up to 2
Individually adjustable dispensing volume [litres]0.05 up to 250.05 up to 25
Particles** > 0.2 µm [1/ml]< 1< 1
Bacteria** [KBE/ml]< 0.01< 0.01
Pyrogens (Endotoxins)*** [EU/ml]–< 0.001
RNase*** [pg/ml]–< 1
DNase*** [pg/ml]–< 5
Proteases*** [µg/ml]–< 0.15
* The values given are typical and may vary depending on the quality of the feed water** With sterile filter capsule 0.2 μm or bio filter capsule*** With ultrafilter/bio filter capsule

OmniaTap xstouch 8 UV-TOCOmniaTap xstouch 8 UV-TOC/UF
Tap water according to DIN 2000
Feedwater pressure [bar]0.5 up to 60.5 up to 6
Feedwater temperature [°C]+ 2 up to 35+ 2 up to 35
Conductivity at 25 °C [µS/cm]< 2000< 2000
TOC-value [ppb]< 1< 1
Colloid index (SDI)< 10< 10
Dissolved CO2 [ppm]< 30< 30
Free chlorine [ppm]< 3< 3
Hardness* [as CaCO3]< 300< 300
Silica [ppm]< 30< 30
pH range4 up to 104 up to 10
* For higher values, pre-treatment must be carried out upstream

OmniaTap xstouch 8 UV-TOCOmniaTap xstouch 8 UV-TOC/UF
Feedwater connectionR3/4″R3/4″
Electrical connection [Volt/Hz]90 – 240/50 – 6090 – 240/50 – 60
Connected load [W]120120
Ambient temperature [°C]+ 2 up to 35+ 2 up to 35
Printer portRS232RS232
Data portUSB-AUSB-A
Dimensions* [W x H x D mm]253 x 530 x 520253 x 530 x 520
Weight dry* [kg]1919
Dimensions production unit under table [W x H x D mm]253 x 420 x 435253 x 420 x 435
Weight production unit dry [kg]1818
Dimensions OptiFilltouch wall dispenser [W x H x D mm]100 x 520 x 460100 x 520 x 460
Weight wall dispenser [kg]2.42.4
Dimensions OptiFilltouch bench dispenser [W x H x D mm]150 x 580 x 450150 x 580 x 450
Weight bench dispenser [kg]88
* With OptiFilltouch dispenser

Article no.System type*
Standard		Article no.System type
Production unit +
wall dispenser*/**		Article no.System type
Production unit +
bench dispenser*/**		Typical applications
18110084OmniaTap xs 8 UV-TOC18111084OmniaTap-W xs 8 UV-TOC18112084OmniaTap-T xs 8 UV-TOCUltra-trace analysis, ICP-MS, HPLC, TOC-analysis
18110085OmniaTap xs 8 UV-TOC/UF18111085OmniaTap-W xs 8 UV-TOC/UF18112085OmniaTap-T xs 8 UV-TOC/UFLife science and microbiology, cell culture media
* RO cartridge, ultrapure water cartridge, sterile filter
capsule 0.2 μm, sterile overflow and sterile vent filter
included		** The Omnia xs production unit can either be installed on a bench, on a wall or under the bench

Accessories
19200305Wall mount Omnia xs
19200090Disinfection cartridge Omnia xs
19200057Disinfectant Omnia – 1 pc. / pack
19200091Disinfection kit Omnia xs complete
19200021Pre-treatment unit OmniaTap – 10″
19102100Bio filter capsule

OmniaTap xsbasic

The practical all-rounder.
For H2O pure type I + II.

 

OmniaTap xsbasic is the practical compact system with OneHand dispenser when both pure and ultrapure water is required in small quantities.

 

The combination of state-of-the-art treatment techniques enables the extraction of pure and ultrapure water from just one system. It can be connected directly to a drinking water pipe. The flexible dispenser is used to extract category I ultrapure water. The removal takes place at the push of a button via the digital control of the dispenser.

 

An integrated 7 litre tank with recirculation keeps the quality permanently at type II. Downstream terminals can be supplied via an optional pressure output on the pure water tank.

Broschure OmniaTap xsbasic (PDF)
  • very space saving, fits on an A4 paper
  • OptiFill dispenser with LCD display as standard
  • spent filters are simply and quickly exchanged
  • Leakage sensor as standard
  • Storage tank with recirculation
  • ready-to-use, ready for connection incl. filter inserts

 

OmniaTap xsbasic 5OmniaTap xsbasic 5 UV
Pure water values type II
Pure water performance at 15 °C [l/h]55
Conductivity at 25 °C [µS/cm]0.067 up to 0.10.067 up to 0.1
Resistance at 25 °C [MΩ x cm]15 up to 1015 up to 10
Ultrapure water values type I
Conductivity at 25 °C [µS/cm]0.0550.055
Resistance at 25 °C [MΩ x cm]18.218.2
TOC-value* [ppb]< 10< 5
Dispensing performance [l/min.]up to 2up to 2
Dispensing preset volumesoptionaloptional
Particles** > 0.2 µm [1/ml]< 1< 1
Bacteria** [KBE/ml]< 0.01< 0.01
* The values given are typical and may vary depending on the quality of the feed water** With sterile filter capsule 0.2 μm

OmniaTap xsbasic 5OmniaTap xsbasic 5 UV
Tap water according to DIN 2000
Feedwater pressure [bar]0.5 up to 60.5 up to 6
Feedwater temperature [°C]+ 2 up to 35+ 2 up to 35
Conductivity at 25 °C [µS/cm]< 2000< 2000
Colloid index (SDI)< 10< 10
Dissolved CO2 [ppm]< 30< 30
Free chlorine [ppm]< 3< 3
TOC-value [ppb]< 50< 50
Hardness* [as CaCO3]< 300< 300
Silica [ppm]< 30< 30
pH range4 up to 104 up to 10
* For higher values, pre-treatment must be carried out upstream

OmniaTap xsbasic 5OmniaTap xsbasic 5 UV
Feedwater connectionR3/4″R3/4″
Electrical connection [Volt/Hz]90-240/50-6090-240/50-60
Connected load [W]120120
Ambient temperature [°C]+ 2 up to 35+ 2 up to 35
Dimensions [W x H x D mm]253 x 530 x 520253 x 530 x 520
Weight dry [kg]1919
The device can be installed either on a bench or on a wall.

Article no.System type*Typical applications
18110051OmniaTap xs basic 5AAS, IC, ICP, buffers and media preparation
18110052OmniaTap xs basic 5 UVUltra-trace analysis, ICP-MS, HPLC, TOC-analysis
* RO cartridge, ultrapure water cartridge, sterile filter capsule 0.2 μm, sterile overflow and sterile vent filter included

Accessories
19200305Wall mount Omnia xs
19200500Volume dosing Omnia xs
19200090Disinfection cartridge Omnia xs
19200057Disinfectant Omnia – 1 pc. / pack
19200091Disinfection kit Omnia xs complete
19200021Pre-treatment unit OmniaTap – 10″

OmniaTap

The powerful all-rounder.
For H2O pure type I + II.

 

OmniaTap is the all-rounder with integrated reverse osmosis incl. circulation tank for type II pure water and cost-effective ultrapure water generation type I.

 

The combination of state-of-the-art treatment techniques enables the extraction of pure and ultrapure water from just one system. It can be connected directly to a drinking water pipe. The flexible dispenser is used to extract category I ultrapure water. The removal takes place at the push of a button via the digital control of the dispenser.

 

The optional storage tank (10, 30 or 60 litres) with recirculation keeps the quality permanently at type II. Downstream terminals can be supplied via an optional pressure output on the pure water tank.

Brochure OmniaTap (PDF)

Storage tanks (optionally 30 or 60 litres) as standard with sterile tank overflow and ventilation filter 0.2 μm

  • OptiFill dispenser with LCD display as standard
    • Tank volume display in percent
  • spent filters are simply and quickly exchanged
  • Leakage sensor as standard
  • Storage tank with recirculation
  • TapWater-Set – direct drinking water connection
  • ready-to-use, ready for connection incl. filter inserts
  •  

OmniaTapOmniaTap UVOmniaTap UV/UF
Pure water values type II
Pure water performance at 15 °C [l/h]12 / 2012 / 2012 / 20
Conductivity at 25 °C [µS/cm]0.067 up to 0.10.067 up to 0.10.067 up to 0.1
Resistance at 25 °C [MΩ x cm]15 up to 1015 up to 1015 up to 10
Pure water tank pressurized outletoptionaloptionaloptional
Ultra pure water values type I
Conductivity at 25 °C [µS/cm]0.0550.0550.055
Resistance at 25 °C [MΩ x cm]18.218.218.2
TOC-value* [ppb]1 up to 51 up to 51 up to 5
Dispensing performance [l/min.]up to 2up to 2up to 1.6
Endotoxins* [EU/ml]< 0.001< 0.001< 0.001
Particles** > 0,2 µm [1/ml]< 1< 1< 1
Bacteria** [KBE/ml]< 0.01< 0.01< 0.01
* in dependence on the feedwater quality** with sterilizing filter 0.2 μm

OmniaTapOmniaTap UVOmniaTap UV/UF
Tap water according to DIN 2000
Feedwater temperature [°C]+ 2 up to 35+ 2 up to 35+ 2 up to 35
Manganese and iron content [mg/l]< 0.05< 0.05< 0.05
Free chlorine content [mg/l]< 0.1< 0.1< 0.1
Silt density index (SDI)max. 3max. 3max. 3

OmniaTapOmniaTap UVOmniaTap UV/UF
Connector sizeR3/4″R3/4″R3/4″
Supply voltage [Volt/Hz]90-240/50-6090-240/50-6090-240/50-60
Connected load [kW]0.10.10.1
Ambient temperature [°C]+ 2 up to 35+ 2 up to 35+ 2 up to 35
Dimensions* [W x H x D mm] 390 x 720 x 615390 x 720 x 615390 x 720 x 615
Weight [kg]202121
* with OptiFill Dispenser

Article no.System type*Typical applications
18200101OmniaTap 12AAS, IC, ICP, buffers and media preparation
18200201OmniaTap 20AAS, IC, ICP, buffers and media preparation
18200102OmniaTap 12 UVUltra-trace analysis, ICP-MS, HPLC, TOC
18200202OmniaTap 20 UVUltra-trace analysis, ICP-MS, HPLC, TOC
18200103OmniaTap 12 UV/UFLife science and microbiology, cell culture media
18200203OmniaTap 20 UV/UFLife science and microbiology, cell culture media
* RO cartridge, ultrapure water cartridge, sterile filter capsule 0.2 μm, sterile overflow and sterile vent filter included

Accessories
19200300Wall mount Omnia
19200056Disinfection kit Omnia
19200057Disinfectant Omnia – 1 pc./pack
19200021Pre-treatment unit OmniaTap –10“

OmniaLabED+

The large all-rounder.
For H2O pure type I + II.

 

OmniaLabED+ is the large all-round supplier for the complete laboratory. The perfect system for both type II applications and at the same time the need for ultrapure water type I.

 

The system meets international water standards such as ASTM, ISO 3696, CLRW (CLSI) and is economically maximized by combining it with continuously self-regenerating electro-deionization without sacrificing demanding analytical applications. In addition, the OmniaLabED+ system holds 100 liters of pure water type II in a storage tank with quality recirculation ready for withdrawal.

 

OmniaLabED+ is predestined for the supply of autoclaves or laboratory dishwashers and the extraction of ultrapure water type I for analytical and life science applications.

Brochure OmniaLabED+ (PDF)
  • OptiFill dispenser with LCD display as standard
    • Tank volume display in percent
  • continuous residual desalination by means of electro-deionization
  • 100 l tank with recirculation and pressure outlet
  • Tank volume modularly expandable
  • spent filters are simply and quickly exchanged
  • Leakage sensor as standard

OmniaLabED+ 20OmniaLabED+ 40
Pure water values type II
Pure water performance at15 °C [l/h]2040
Conductivity at 25 °C [µS/cm]0.067 up to 10.067 up to 1
Resistance at 25 °C [MΩ x cm]15 up to 115 up to 1
Silicate removal* [%]99.999.9
Pure water tank pressurized outletoptionaloptional
Ultra pure water values type I
Conductivity at 25 °C [µS/cm]0.0550.055
Resistance at 25 °C [MΩ x cm]18.218.2
TOC-value (with UV-unit)* [ppb]< 5< 5
Dispensing performance dispenser [l/min.]up to 2up to 2
Particles** > 0,2 µm [1/ml]< 1< 1
Bacteria** [KBE/ml]< 0.1< 0.1
* in dependence on the feedwater quality** with sterilizing filter 0.2 μm

OmniaLabED+ 20OmniaLabED+ 40
Softened water according to DIN 2000
Feedwater temperature [°C]+ 2 up to 35+ 2 up to 35
Manganese and iron content [mg/l]< 0.05< 0.05
Free chlorine content [mg/l]< 0.1< 0.1
Silt density index (SDI)max. 3max. 3

OmniaLabED+ 20OmniaLabED+ 40
Connector sizeR3/4″R3/4″
Supply voltage [Volt/Hz]90-240/50-6090-240/50-60
Connected load [kW]0.250.25
Ambient temperature [°C]+ 2 up to 35+ 2 up to 35
Dimensions tower* [W x H x D mm] 511 x 1520 x 575511 x 1520 x 575
Dimensions base cabinet tank [W x H x D mm]511 x 800 x 575511 x 800 x 575
Weight [kg]4343
* with OptiFill Dispenser

Article no.System type*Typical applications
18700020OmniaLabED+ 20Feedwater for autoclaves and laboratory washers, analytical and bioscience applications
18700040OmniaLabED+ 40Feedwater for autoclaves and laboratory washers, analytical and bioscience applications
* RO cartridge, ultrapure water cartridge, sterile filter capsule 0.2 μm, sterile overflow and sterile vent filter + CO2 absorber included

Accessories
16125000Water softener MixMulti 32
19200021Pre-treatment unit OmniaLab – 10“
19200050UV Flow through disinfection – 254 nm
19200052UV Unit for TOC reduction – 254 nm
16561201External pressure booster pump SC 3000